Data Structures and Algorithms

10 Graphs

10.1 Minimum Spanning Trees
Greedy Algorithms
Many algorithms can be formulated as a finite series of guesses,
eg in the Travelling Salesman Problem,
we try (guess) each possible tour in turn and determine
its cost.
When we have tried them all,
we know which one is the optimum (least cost) one.
However, we must try them all before we can be certain that we
know which is the optimum one,
leading to an O(n!) algorithm.
Intuitive strategies, such as
building up the salesman's tour by adding the city which is closest to
the current city, can readily be shown to produce suboptimal tours.
As another example, an experienced chess player will not take an
opponent's pawn with his queen  because that move produced the
maximal gain, the capture of a piece  if his opponent is guarding that
pawn with another pawn. In such games, you must look at all the
moves ahead to ensure that the one you choose is in fact the optimal
one. All chess players know that shortsighted strategies are good
recipes for disaster!
There is a class of algorithms, the greedy algorithms,
in which we can find a solution by using only knowledge available at
the time the next choice (or guess) must be made.
The problem of finding the Minimum Spanning Tree is a good example
of this class.
The Minimum Spanning Tree Problem
Suppose we have a group of islands that we wish to link with bridges
so that it is possible to travel from one island to any other in the group.
Further suppose that (as usual) our government wishes to spend the
absolute minimum amount on this project (because other factors like the
cost of using, maintaining, etc, these bridges will probably be the responsibility
of some future government ).
The engineers are able to
produce a cost for a bridge linking each possible pair of islands.
The set of bridges which will enable one to travel from any island to any other
at minimum capital cost to the government is the minimum spanning tree.
We will need some definitions first:
Graphs
A graph is a set of vertices and edges which connect them.
We write:
G = (V,E)
where V is the set of vertices and
the set of edges,
E = { (v_{i},v_{j}) }
where v_{i} and
v_{j} are in V.
Paths
A path, p, of length, k, through a
graph is a sequence of connected vertices:
p = <v_{0},v_{1},...,v_{k}>
where, for all i in (0,k1:
(v_{i},v_{i+1}) is in E.
Cycles
A graph contains no cycles if there is no path
of nonzero length through the
graph,
p = <v_{0},v_{1},...,v_{k}>
such that v_{0} = v_{k}.
Spanning Trees
A spanning tree of a graph, G, is a set of
V1 edges that connect all vertices of the
graph.
Minimum Spanning Tree
In general, it is possible to construct multiple spanning trees for a
graph, G.
If a cost, c_{ij}, is associated with each edge,
e_{ij} = (v_{i},v_{j}),
then the minimum spanning tree is the set of edges,
E_{span}, forming a spanning tree,
such that:
C = sum( c_{ij}  all e_{ij} in E_{span} )
is a minimum.
Kruskal's Algorithm
This algorithm creates a forest of trees.
Initially the forest consists of n single node trees
(and no edges).
At each step, we add one (the cheapest one) edge so
that it joins two trees together.
If it were to form a cycle, it would simply link
two nodes that were already part of a single connected tree,
so that this edge would not be needed.
The basic algorithm looks like this:
Forest MinimumSpanningTree( Graph g, int n, double **costs ) {
Forest T;
Queue q;
Edge e;
T = ConsForest( g );
q = ConsEdgeQueue( g, costs );
for(i=0;i<(n1);i++) {
do {
e = ExtractCheapestEdge( q );
} while ( !Cycle( e, T ) );
AddEdge( T, e );
}
return T;
}
The steps are:
 The forest is constructed  with each node in a
separate tree.
 The edges are placed in a priority queue.
 Until we've added n1 edges,
 Extract the cheapest edge from the queue,
 If it forms a cycle, reject it,
 Else add it to the forest.
Adding it to the forest will join two trees together.
Every step will have joined two trees in the forest together,
so that at the end,
there will only be one tree in T.
We can use a heap for the priority queue.
The trick here is to detect cycles.
For this, we need a
unionfind structure.
Unionfind structure
To understand the unionfind structure, we need to look at
a partition of a set.
Partitions
A partitions is a set of sets of elements of a set.
 Every element of the set belong to one of the sets in the
partition.
 No element of the set belong to more than one of the subsets.
or
 Every element of a set belongs to one and only one
of the sets of a partition.
The forest of trees is a partition of the original set of nodes.
Initially all the subsets have exactly one node in them.
As the algorithm progresses, we form a union of two of the trees
(subsets), until eventually the partition has only one subset
containing all the nodes.
A partition of a set may be thought of as a set of
equivalence classes.
Each subset of the partition contains a set of equivalent
elements (the nodes connected into one of the trees of the
forest).
This notion is the key to the cycle detection algorithm.
For each subset, we denote one element as the
representative of that subset or equivalence class.
Each element in the subset is, somehow, equivalent and
represented by the nominated representative.
As we add elements to a tree,
we arrange that all the elements point to their representative.
As we form a union of two sets,
we simply arrange that the representative of one of the sets
now points to any one of the elements of the other set.
So the test for a cycle reduces to:
for the two nodes at the ends of the candidate edge,
find their representatives.
If the two representatives are the same, the two
nodes are already in a connected tree and adding this
edge would form a cycle.
The search for the representative simply follows a chain of
links.
Each node will need a representative pointer.
Initially, each node is its own representative,
so the pointer is set to NULL.
As the initial pairs of nodes are joined to form a tree,
the representative pointer of one of the nodes is made to point
to the other, which becomes the representative of the tree.
As trees are joined, the representative pointer of the
representative of one
of them is set to point to any element of the
other. (Obviously, representative searches will be
somewhat faster if one of the representatives is made to
point directly to the other.)
Equivalence classes also play an important role in the
verification of software. 
Select diagrams of
Kruskal's algorithm
in operation.
Greedy operation
At no stage did we try to look ahead more than one
edge  we simply chose the best one at any stage.
Naturally, in some situations, this myopic view would lead
to disaster!
The simplistic approach
often makes it difficult to prove that a greedy
algorithm leads to the optimal solution.
proof by contradiction is a common proof
technique used: we demonstrate that if we didn't make
the greedy choice now, a nonoptimal solution would result.
Proving the MST algorithm
is, happily, one of the simpler proofs by contradiction!
Data structures for graphs
You should note that we have discussed graphs in an abstract
way: specifying that they contain nodes and edges and using
operations like AddEdge, Cycle, etc.
This enables us to define an abstract data type without
considering implementation details, such as how we will store the
attributes of a graph!
This means that a complete solution to, for example, the MST
problem can be specified before we've even decided how to store
the graph in the computer.
However, representation issues can't be deferred forever,
so we need to examine ways of
representing graphs in a machine.
As before, the performance of the algorithm will be determined
by the data structure chosen.
Minimum Spanning Tree Animation
This animation was written by Mervyn Ng. 

Please email comments to:
morris@ee.uwa.edu.au

 Greedy algorithms
 Algorithms which solve a problem by making the next step
based on local knowledge alone  without looking ahead to
determine whether the next step is the optimal one.
 Equivalence Classes
 The set of equivalence classes of a set is a
partition of a set
such that all the elements in each subset (or
equivalence class)
is related to every other element in the subset by an
equivalence relation.
 Union Find Structure
 A structure which enables us to determine whether two sets
are in fact the same set or not.
 Kruskal's Algorithm
 One of the two algorithms commonly used for finding a
minimum spanning tree  the other is
Prim's algorithm.
© John Morris, 1998